PAGE 12
www.rosco.com
TIMED REMOTE INSTRUCTIONS
TIMED REMOTE CONTROL
OPERATING INSTRUCTIONS
OVERVIEW
The TIMED REMOTE CONTROL is an analog interface that consists of an array of switches
and knobs. These allow the Delta 6000 base unit to be operated: manually; from timers; or
from a 0-10 volt signal. The timers will allow production of fog for up to 2 minutes with
intervals of up to 4 minutes between bursts. In addition, the TIMED REMOTE CONTROL
has LEDs that indicate when the reservoir is running low on fluid.
16.
INITIAL OPERATION
Follow steps 1-4 above. When first powered, the red LED marked
“HEATING”
will light
indicating that the Delta is heating up. Let the machine warm up until the green
“READY”
light is lit.
Note:
The TIMED REMOTE CONTROL
will indicate that the fluid container is
low on fluid with a red LED marked
“LOW FLUID”
.
17.
LOCAL OPERATION
To produce fog directly from the remote, push the
FOG
switch located on the right side of the
remote control. If the upper part of the switch is depressed, the Delta will produce fog until
the switch is returned to the center position. To create fog momentarily, depress the lower part
of the switch. When the switch is released it will automatically return to the center position.
The volume of the fog can be varied by turning the
FOG VOLUME
knob until the desired
level is reached.
18.
TIMERS
POWER
Button
TIMER
Button
TIMER
LED
POWER
LED
FOG
LED
FOG
Switch
ON TIME
Knob
OFF TIME
Knob
VOLUME
Control
TIMED REMOTE CONTROL
