PAGE 13
www.rosco.com
TIMED REMOTE INSTRUCTIONS
The TIMED REMOTE CONTROL is equipped with timers to automatically sequence the
fog. To set the amount of time that the machine will make fog, turn the knob marked
ON
TIME
. The longest time that the TIMED REMOTE will make fog is 2 minutes. By
experimenting with the knob, the desired time can be determined. To set the amount of time
between bursts, turn the knob marked
OFF TIME
. The longest time between bursts is 4
minutes. By experimenting with the knob, the desired time can be determined.
To turn the timers on, push the
TIMER
button located on the left side of the ANALOG
REMOTE. A yellow LED above the switch will light indicating that the timers are activated.
The on/off cycle will start with a burst of fog. The volume of the fog can be varied by turning
the
FOG VOLUME
knob until the desired level is reached. To turn the timers off, push the
TIMER
switch and the yellow LED will turn off.
Note:
For more accurate timer control or longer sequences, use the DIGITAL/DMX
REMOTE instead of the TIMED REMOTE CONTROL.
