PAGE 8
www.rosco.com
DIGITAL/DMX INSTRUCTIONS
button once. The Language Menu will display. Push an
ARROW
button to scroll through the
language choices. When the desired language is displayed, push the
ENTER
button.
9.
MANUAL MODE
To produce fog manually: With the Operation Menu displayed, push the
RUN
button or the
momentary (
MOM
) button located on the remote control. Push the
RUN
button again to stop
producing fog. (The momentary button will stop producing fog as soon as it is released.) The
volume of fog can be varied by turning the
JOG WHEEL
until the desired level is reached.
The output level is listed in 5% increments on the LCD display.
10.
TIMER MODE
The DIGITAL/DMX REMOTE CONTROL
is equipped with timers. To enable the timers:
With the Operation Menu displaying, push the
ENTER
button until the LCD reads
“SET
TIMERS”
. Push an
ARROW
button until
“YES”
is blinking. Push the
ENTER
key. The
LCD will next display the
ON TIME
settings. This refers to the amount of time that the
machine will make fog. The “minutes” display will be blinking. Turn the
JOG WHEEL
until
the desired amount of time is displayed (up to 9 minutes). Next push an
ARROW
button and
the “seconds” display will be blinking. Turn the
JOG WHEEL
until the desired amount of
seconds (up to 59) is displayed. If you want to change the minutes push an
ARROW
button
again.
Once the desired
ON TIME
is displayed, push the
ENTER
button for the
OFF TIME
setting. This refers to the amount of time between bursts of fog. The “minutes” display will be
blinking. Turn the
JOG WHEEL
until the desired amount of time is displayed (up to 59
minutes). Next push an
ARROW
button and the “seconds” display will be blinking. Turn the
JOG WHEEL
until the desired amount of seconds (up to 59) is displayed. If you want to
change the minutes push an
ARROW
button again.
Once the
OFF TIME
is set, push the
ENTER
button and the LCD will display
“SET
DMX?”
. Answer
“YES”
if you wish to set a DMX channel (see below
DMX MODE
) or
“NO”
if you do not. Push the
ENTER
button. The display will read
“SAVE SETTINGS?”
.
If you want to keep the timer settings push an
ARROW
button until “
YES”
is blinking then
push the
ENTER
button. If you do not want to keep the timer settings, push an
ARROW
button until “
NO”
is blinking and then push the
ENTER
button. The LCD will return to the
“SET TIMERS”
display. New times can now be entered. Once the settings are saved and the
Operation Menu is displayed, the timer function can be turned on by pushing the
TIMER
button on the remote. The yellow LED over the
TIMER
button will light indicating that the
Delta is in timer mode. When timers are no longer required, simply push the
TIMER
button
again. To adjust the volume in the TIMER MODE, turn the
JOG WHEEL
to the desired fog
volume.
Note:
When “
YES”
is chosen in the
“SAVE SETTINGS”
submenu, the memory in the
DIGITAL/DMX REMOTE CONTROL
will remember the settings even when the machine is
turned off or disconnected from a power source.
11.
DMX MODE
