Galaxy Raid GHDX2-2430S-16U4D Installation and Hardware Reference Manual
5-4
Replacing Controller Module Components
Figure 5-1: Removing the BBU Module
Step 5.
Disconnect all cables
from the controller module. These include
the cables connecting to the host or cascaded enclosures, Ethernet
cables for the management purpose, and any cables connecting to
the COM ports.
Step 6.
Remove the screws
from underneath each eject lever. (See
Figure
5-2
)
Figure 5-2: Removing the Controller Module Screws
Step 7.
Remove the controller module
by pressing down the two (2) levers
at the back of the controller module. The controller module will
automatically be eased out of the controller module bay. (See
Figure 5-3
)
