Galaxy RAID GHDX2-2430S-16U4D Installation and Hardware Reference Manual
4-4
Power
On
Press the “
ESC
” button to clear current event if a system event prompts on
the LCD screen.
The combination of an LCD screen and keypad provides access to all
firmware configurable options and system information. To access the
firmware-embedded configuration utility, use the following methods:
1.
Press the
ENT
button for two (2) seconds on the initial screen
to enter the Main Menu.
2.
Press the
UP
and
DOWN
arrow keys to select a functional
category. Move your cursor bar and press Enter on the last
category, “View and Edit Event Logs.”
More details on firmware configuration can be found in the firmware
Operation Manual
in your product Utility CD.
The
MUTE
button can be used to stop the audible alarm until the next
controller event.
The LCD screen startup sequence is shown and described in the sequence
below:
This screen appears when the PSUs are
turned on.
System is performing a self test.
System power-on self test is completed.
System is accessing different interfaces.
Verifying installed cache memory.
System is ready. You can now start to
configure the subsystem.
Initializing…
Please Wait...
GALHDX2
GALHDX2
256MB RAM, Wait…
GALHDX2
No Host LUN
Power on Self
Test Please Wait…
Power on
Init Completed..
