1. Boom
2. Mast
3. Handlebar
4. Battery pack
5. Emergency stop
6. Control box
7. Motor for base-width adjustment
8. Rear castors with brakes
9. SlingBar with safety latch
10. Front castors
11. Emergency lowering (mechanical)
12. Motor/actuator for boom
13. Padded leg support
14. Foot rest
Rena 440 EM/EE/DS
Max. load: 205 kg / 440Ibs
Rena 440
is a mobile sit-to-stand lift that has been developed for use in combination
with the correct lifting accessories to help the patient to stand up comfortably from a
seated position. It provides support under the feet, against the shins and behind the back.
R
ena
440 is used in combination with StandUpSling.
RoMedic’s slings and lifts are part of the SystemRoMedic concept, which takes a holistic
approach to patient transfers. SystemRoMedic has four categories: transfer, repositioning,
support and lifting.
Visual inspection
Inspect hoist functions regularly. Check to ensure that material is free from damage.
Read instructions for all assistive devices used in connection with transfers. Keep the
manual where it is accessible to users of the product.
Do not leave the patient unattended during a lifting situation.
Before use:
Make certain the lift is properly assembled.
Lifting accessories must be properly trial fitted and tested in relation to the patient’s needs
and functional ability.
Check Slingbar connection and safety latch function.
Check lift lifting function and base-width adjustment.
Under no circumstances may the lift be used by persons who have not
received instruction in the operation of the lift.
Functional inspection
Always read the instructions
M a n u a l
Version
3.0d
10
9
8
7
6
5
3
2
12
11
1
13
4
14
Rena 440/600
Rena
440
/600
EE
Rena
440EM
R
ena
440
/600
DS
