manualshive.com logo in svg

RoMedic Rena 440, Руководство пользователя

Поделиться
Скачать
RoMedic Rena 440 Скачать руководство пользователя страница 12

VER 3.0D 

12 

07/2009 

Care and Maintenance 

 

For safe and trouble-free operation

, a few routine procedures should be 

performed every day the lift is used. 
• Visually inspect the patient lift and check for external damage or wear. 

• Check that all screws and lock nuts on the slingbar are tight. 
• Check that the safety latches on the slingbar are on and  work properly. 

• Check the handcontrol and the lift and width movements. 

• Check the emergency lowering function (both electrical and mechanical). 
• Charge the battery every day the lift is used, and check charger function. 

If needed, clean the lift with warm water or mild soap solution. 

Warning! Do 

not use chemicals containing phenol or chlorine, since this may 

damage the aluminum materials. 

Inspection 

The lift must be thoroughly inspected at least once per year. Pay particular 

attention to parts that show wear, for example, joints, bolts, etc. Service must be 
carried out according to R

oMedic

 service manual and by authorized personnel. 

IMPORTANT! 

Repairs and maintenance may only be carried out by qualified service personnel 
using original R

oMedic

 replacement parts or equivalent. 

Transportation and storage 

During transportation, or when the patient lift is not to be used for some time, 

the emergency stop button should be pushed in. Store the lift at a temperature 
above the freezing point and at normal relative humidity (no more than 60%). 

Service agreements 

R

oMedic

 recommends you to consider a service agreement for regular maintenance 

and testing of your R

oMedic

 mobile lift. Contact your local R

oMedic

 representative for 

more information. 
R

oMedic

’s products are constantly being updated and refined. 

RoMedic

 reserves the right 

to change aspects of the products without prior notice. Contact your local R

oMedic

 

representative for the latest information and advice. 

Made in USA 

RoMedic Rena lifts are manufactured according to CE standards and the Linak 

components meets the CE and UL standards. 

Contact RoMedic 

 
RoMedic, Inc. 

 

Toll Free: 

888.625.4343 

PO Box 388   

 

Phone: 

717.733.1444 

Ephrata, PA 17522   

Facsimile: 

888-691-1091 

www.romedic.com

  

E-mail: 

[email protected] 

 
 

Содержание Rena 440














Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды