77-014 - Yasui Rotating Burnout Furnace 37+
71
5) Display changes to next page.
6) Display changes to next page.
Edit value to your target. Push MODE key again.
Push MODE key again.
7) You will go back to PV window.
A message E1605 will be on Operation panel
when thermocouple for the device is defective,
while another message
will blink
on the display of controller which means Input
error (signal from thermocouple).
CAUTION
Do not change default setting at PV window.
Another configuration will be activated which
disturbs normal operation.
The value must be always ‘0’.