ROMANOFF Yasui 77-014 Скачать руководство пользователя

Страница: 7 / 71

77-014 - Yasui Rotating Burnout Furnace 37+

- The manufacturer shall in no event be liable for any damage resulting from improper use,

negligence to follow the warnings and cautions in the instructions manual or the labels on

the machine, unskillfulness, use of non-original optional / consumable accessories / spare

parts, non-authorized modification.

- The manufacturer shall in no event be liable for any consequential or indirect damages

including, but not limited to, loss of production or loss of profit or damages due to machine

downtime.

- Damages to the instrument and / or human bodies resulting from contacting with high

temperature parts, and their consequential or indirect damages are not compensated by

the manufacturer.

- Damages resulting from delay of reaction at emergency and mistaken operation are not

compensated by the manufacturer.

- Damages from electrical noise, over voltage, or wiring error are not compensated by the

manufacturer.

- Casting results (including burnout for normal precious metal casting, for stone-in-wax

casting and etc.) by this manual are not compensated by the manufacturer.

- No part of this document may be copied or in any way reproduced without the expressed

written consent of the manufacturer.

Содержание Yasui 77-014








































































Результаты поиска

Содержание Yasui 77-014

Отзывы:

Похожие инструкции для Yasui 77-014

Бренды по названию

Популярные бренды

ROMANOFF Yasui 77-014, Руководство по эксплуатации

Результаты поиска

Содержание Yasui 77-014

Отзывы:

Похожие инструкции для Yasui 77-014

Бренды по названию

Популярные бренды