Roltec BOA2 страница 14 Скачать руководство пользователя | Manualshive

Страница: 14 / 64

background image

MANUAL

MANUAL

14

Using the PG R network.

General advice on wheelchair control

:

The wheelchair is switched off when there is no light on the display, and on when the display

lights up.

The wheelchair’s control system can be in two or more statuses. Either ready to drive, or in a

status in which it cannot be driven but where the joystick (control stick) can be used to operate

all electrically powered parts of the chair - leg supports, seat lift, etc. - and make various

adjustments to the chair.

Mode:

If you want to use the control stick for any other functions other than running, you can switch

from drive status to mode status (there may well be several mode statuses) by activating the

mode button, and hence gain access to the wheelchair’s other functions.

You use the mode button to switch from one mode to another.

Apart from the display diagrams that belong to the electrically-powered parts of your

wheelchair, other mode diagrams are available if additional control equipment is fitted

The wheelchair’s electrical functions are activated by moving the control stick either forwards

or backwards.

If the display does not show the part of the wheelchair you want to activate, you can scroll

forward to the required part by moving the control stick to the right or left.

Speed:

The maximum speed can be controlled by using the speed button on the control unit.

The speed bar in the display will show the maximum speed in the profile selected.

The speed can be controlled by using the joystick during driving. If the joystick is moved a little,

«
...
12
13
14
15
16
...
»

Содержание BOA2

































































Отзывы:

Нет отзывов

Похожие инструкции для BOA2

Бренд: R82 Страницы: 3

Бренд: R82 Страницы: 92

Бренд: R82 Страницы: 10

Бренд: R82 Страницы: 17

Бренд: R82 Страницы: 22

Бренд: HEALTH PRODUCTS Страницы: 11

Travel Chair in Tartan

Бренд: Viva Medi Страницы: 2

Бренд: SupaChaiR Страницы: 20

Folder Adaptor Bar

Бренд: max mobility Страницы: 4

LATERAL TRUNK SUPPORT

Бренд: Comfort Company Страницы: 2

Бренд: BIOS LIVING Страницы: 6

Бренд: Handicare Страницы: 32

Бренд: CareCo Страницы: 29

Бренд: R82 Страницы: 178

Hand Warmer IDM-HW

Бренд: Mo-vis Страницы: 36

Бренд: TGA Страницы: 8

Бренд: R82 Страницы: 7

Secura Premium 23556

Бренд: Maximex Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды