Roltec BOA2, Руководство пользователя

Страница: 36 / 64

MANUAL MANUAL
36
Angles for tie-down straps
When tie-down straps are installed, their angles must fall within the preferred angles shown
below.
Preferred angles for the front tie-down straps Preferred angles for the rear tie-down straps
⚠
General instructions for seat belts for restraining wheelchair users
⚠
Use a 3-point seat belt system to restrain the wheelchair user. The belt must have the
approval mark ISO 10542, e (EU European certification) or (E) (UNECE certification).
⚠
If the lap belt and shoulder belt can be separated, both should be used to restrain the user
and reduce the risk of injury to the head and chest in the event of a vehicle collision.
⚠
The user’s seat belt must securely attached to suitable points in the vehicle.
⚠
Use an appropriate headrest during transport.
⚠
A postural belt (e.g. a lap belt or other supporting belt), which is secured to the vehicle’s
seat or frame, must not be used as a seat belt or be relied on to restrain a wheelchair user in a
vehicle in motion.
⚠
The seat belt should be in full contact with the shoulder, chest and pelvis, and the lap belt
should be positioned low across the front of the pelvis, where the pelvis and thigh meet (see
ISO standard 7176-19)).
⚠
The transverse belt to the torso should run, as illustrated, obliquely across the chest and
close to the mid-point of the shoulder.