Roltec BOA2 страница 2 Скачать руководство пользователя

Страница: 2 / 64

MANUAL

Preface

ROLTEC el-kørestole A/S would like to congratulate you on the purchase of your new

wheelchair and thank you for the trust you have placed in us in choosing our product.

Models may vary, therefore not everything will necessarily apply to your wheelchair.

ALWAYS READ THE USER MANUAL BEFORE USING THE WHEELCHAIR.

⚠

The first time the wheelchair is used, it should be in an area with plenty of space and no

traffic, starting at a low speed.

❗

Children and young people should read the documentation for the wheelchair with an adult

before using it for the first time.

In this user manual you will find all the information you need to be able to operate the

wheelchair. If you have any questions that are not clarified in this user manual, you are always

welcome to contact your ROLTEC dealer.

If you find that the font size in the printed version of the user manual is difficult to read, the

user manual is available in large font in an electronic version of this manual and is available

from ROLTEC upon request. You can then enlarge the PDF file on the screen using the zoom

function.

Intended use/INDICATIONS

ROLTEC’s electric wheelchairs are designed for people who have a partial or full walking

disability, but whose sight, physical and mental capacity enables them to use an electric

wheelchair.

Contraindications

There are no known contraindications.

(MWD) Boa2.
Category B

User manual:

BOA2_USERMANUAL v1.5.2 UK

Article number: BOA2_USERMANUAL v1.5.2 UK

Produced and published by ROLTEC el-kørestole A/S

Содержание BOA2

































































Результаты поиска

Содержание BOA2

Отзывы:

Похожие инструкции для BOA2

Бренды по названию

Популярные бренды

Roltec BOA2, Руководство пользователя

Результаты поиска

Содержание BOA2

Отзывы:

Похожие инструкции для BOA2

Бренды по названию

Популярные бренды