Roltec BOA2 страница 34 Скачать руководство пользователя

Страница: 34 / 64

MANUAL

External control box:

The wheelchair may be supplied with an external control box, which can be used instead of, or

together with, the control stick and display diagrams for activating the wheelchair’s electrically-

powered functions.

Transporting the chair

⚠

The electric wheelchair must not be lifted by the chair back, leg supports or armrests.

Loading/unloading

❗

The electric wheelchair can be loaded/unloaded using a ramp.

Securing during transportation

The electric wheelchair must be secured by means of tie-down hooks.

❗

The 4 approved tie-down hooks on the wheelchair (marked with hook symbols at the side

of the hooks)

Transportation as freight:

The wheelchair must stand on its wheels at all times

Transportation by car:

Transporting the wheelchair and user in motorised vehicles

⚠

You must ensure that the vehicle is suitable for the road transportation of passengers

seated in wheelchairs, and that the vehicle is suitably equipped to transport a passenger in a

wheelchair. Make sure that the method of unloading is suitable for your vehicle type.

⚠

The vehicle’s undercarriage and anchorage points must be able to withstand the total weight

of the wheelchair, with all accessories, and the user.

⚠

The wheelchair must be secured in a forward-looking direction. The wheelchair is crash-

tested in accordance with ISO 7176-19: Mobile equipment on wheels used as seats in

motorised vehicles, and meets the requirements for head-on collisions for forward-facing

seating. The wheelchair has not been tested for other collision directions in a motorised

vehicle.

Note: WTORS must be used in accordance with the manufacturer’s instructions.

WTORS: Is an abbreviation of Wheelchair Tie-down and Occupant Restraint System, which is

used in ISO standards 7176-19 and 10542. It is a complete system consisting of equipment

for securing the wheelchair and a seat belt for the user. The abbreviation WTORS will be used

in this user manual.

Содержание BOA2

































































Результаты поиска

Содержание BOA2

Отзывы:

Похожие инструкции для BOA2

Бренды по названию

Популярные бренды

Roltec BOA2, Руководство пользователя

Результаты поиска

Содержание BOA2

Отзывы:

Похожие инструкции для BOA2

Бренды по названию

Популярные бренды