Roltec BOA2, Руководство пользователя

Страница: 44 / 64

MANUAL MANUAL
44
Positioningbelts :
The wheelchair can be supplied with different types of belts from our large belt selection. The
belts can be fastened as required on the seat’s C-profile or the seat’s back.
Fittings for mounting the lap belt are installed in the C-profile on both sides of the seat, as in
Fig. 8.
⚠
Belts mounted on the wheelchair must not be used as personal seat belts during car
journeys. The car’s seat belts must be used by the user at all times.
This rule applies, regardless of whether belts are used in the wheelchair’s tie-down hooks -
Dahl’s Docking System and tie-down systems.
Figure 8 installing the lap belt
Push function
The electronic brake can be disconnected if it is necessary to move/push the wheelchair
manually.
The electric vehicle’s motors are equipped with automatic brakes that
prevent the electric vehicle from rolling. This brake can be disconnected if it is necessary to
move/push the wheelchair manually.
The brake release levers are located on the side of the central chair between the front wheels
and the large traction wheels. The brakes are released when the levers are pressed down.
When the brakes are disconnected, the wheelchair cannot be driven with the joystick. The