4
Hold down the Track 4 STATUS button and press the SELECT
buttons for Tracks 1–3.
The SELECT indicators blink green.
5
Normally, the signal received via the INPUT 4 jack is assigned for
recording on Track 4. When you wish to record only Tracks 1–3,
Perform steps 6–7.
6
Press [FADER (EDIT)] twice.
The FADER indicator light orange. (Input Mixer)
7
Hold down the Track 4 STATUS button and press the channel 4
SELECT button.
The SELECT indicator goes off.
8
Now you have set it up so that you can monitor Tracks 1–3 on
Track Channel 4. Press [FADER (EDIT)].
The FADER indicator light green. (Track Mixer)
9
Press [PLAY] to begin playback of the song.
10
Using the channel faders 1–3, adjust the volume balance for each
track.
At this point, the monitored sound is set up to be recorded as is to Track 4. At
this time, raise the volume level as much as possible without causing distortion.
11
Press [STOP] to stop playback of the song.
12
Press [ZERO] to return to the beginning of the song.
13
Press the Track 4 STATUS button.
The STATUS indicator blinks red.
)
Completing the Song (Mixdown)
37
