manualshive.com logo in svg

Roland VersaSTUDIO BN-20A, Руководство пользователя

Поделиться
Скачать
Roland VersaSTUDIO BN-20A Скачать руководство пользователя страница 75

Replacing the Wiper

The wiper is a component used for cleaning the print heads. When the message appears on the Utility
icon on the computer task tray, it is time to replace the wiper with a new one. To purchase a wiper,
contact us directly or your authorized Roland DG Corp. dealer.

When the warning alarm sounds during replacing the wiper
An alarm sounds about 30 minutes after the start of the operation. Perform the operation by following
the message displayed in the Utility window.

WARNING

Be sure to perform operations as specified by the instructions, and never touch
any area not specified in the instructions.

Sudden movement of the machine may cause injury.

Procedure

1.

Open the Utility window.

P. 11 "How to Open the Utility Window / Exit the Utility" 

2.

In the [Replace Tools] tab, click [Replace Wiper].

Procedures for replacing the wiper are displayed. Carefully read the on-screen instructions and
start the replacement work.

3.

When the operation is completed, close the front cover.

Replacing Parts for Maintenance

74

 Replacing Consumable Parts

Содержание VersaSTUDIO BN-20A

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды