manualshive.com logo in svg

Roland VersaSTUDIO BN-20A, Руководство пользователя

Поделиться
Скачать
Roland VersaSTUDIO BN-20A Скачать руководство пользователя страница 71

When Manual Cleaning Is Necessary

The timing with which Manual Head Cleaning is required varies depending on the type of ink you are
using. Be sure to perform this cleaning when it is required.

P. 67 "About Periodical Cleaning Menus" 

If the following problems are found, Manual Head Cleaning is recommended

If the following problems occur and any of the automatic cleaning functions have not solved the prob-
lem, perform Manual Head Cleaning.
Please note that replacement of the wiper may also be an effective method to solve a problem.

Nozzle clogging

Ink spots

Dragged dirt

Dust and dirt stick to the print heads and
prevent normal discharge of ink.

Ink gathers around dirt and grime near
the print heads and ink drops are
formed.

Dragging occurs when dirt around the
print heads comes into contact with me-
dia.

MEMO

• When you need to order the cleaning sticks and cleaning liquid for Manual Head Cleaning, please contact us direct-

ly or your authorized Roland DG Corp. dealer.

• Print heads are consumable parts. Depending on the frequency of use, periodical replacement is required. Please

order them directly from us or your authorized Roland DG Corp. dealer.

 RELATED LINKS 

・

   P. 74 "Replacing the Wiper"

Manual Cleaning

70

 Regular Maintenance

Содержание VersaSTUDIO BN-20A

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды