manualshive.com logo in svg

Roland VersaSTUDIO BN-20A, Руководство пользователя

Поделиться
Скачать
Roland VersaSTUDIO BN-20A Скачать руководство пользователя страница 105

These are the main messages that appear in the Utility window to prompt correct operation. They do
not indicate any error. There are other messages that appear in the Utility window. Follow the dis-
played prompts and take action accordingly.

[XX ink : Shake the cartridge well]

Remove the ink cartridge that is indicated in *** and shake it well.

 RELATED LINKS 

・

   P. 63 "Maintenance of Ink Cartridges"

[The Waste cartridge is full.]

The waste cartridge is full. Replace the waste cartridge with a new one.

 RELATED LINKS 

・

   P. 64 "Replacing the Waste Cartridge"

[Replace the wiper.]

It is time to replace the wipers. Replace the wipers.

 RELATED LINKS 

・

   P. 74 "Replacing the Wiper"

[Replace the felt wiper.]

It is time to replace the felt wiper. Replace the felt wiper.

 RELATED LINKS 

・

   P. 75 "Replacing the Felt Wiper"

[The connection to the printer has been released.]

A USB cable that connects this machine and the computer is unplugged, or the main power of this ma-
chine is switched off. If the machine is allowed to stand with the main power switched off, the auto-
matic maintenance fails to work and it may cause a machine malfunction. Make sure that the main
power is on at all times.

[Clean the printer manually.]

If [Clean the printer manually.] message is displayed on the screen of the computer connected to the
printer, be sure to perform manual cleaning.

 RELATED LINKS 

・

   P. 70 "Manual Cleaning"

Messages

104

 Handling Messages and Error Messages

Содержание VersaSTUDIO BN-20A

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды