manualshive.com logo in svg

Roland VersaSTUDIO BN-20A, Руководство пользователя

Поделиться
Скачать
Roland VersaSTUDIO BN-20A Скачать руководство пользователя страница 5

[Crop mark detection could not be started.] / [Crop marks were not found. Output will be canceled.] ...

......................................................................................................................... 105

[The operation has been stopped to prevent the print heads from drying out. Turn the printer off.]. 105
[Motor error] .............................................................................................................. 105
[Waste cartridge is estimated to be full] ............................................................................ 106
[Temperature error] ..................................................................................................... 106
[Cover open error.] ...................................................................................................... 106
[Sheet setup error]....................................................................................................... 106
[Data error] ................................................................................................................ 106
[Ink has run out.] ......................................................................................................... 106
[Pinch lever was returned.] ............................................................................................ 106
[No sheet is present.].................................................................................................... 107
[Printing cannot continue because the end of the sheet was detected. Printing will be canceled.] ... 107
[ServiceCall No**] ........................................................................................................ 107
[Ink Cartridge error : *** ink cartridge ] ............................................................................. 107
[BN-20 Utility is already running.] .................................................................................... 107
[The cleaning liquid cartridge is empty. Replace the cleaning liquid cartridge with a new one.] ....... 107

Appendix...............................................................................................108

Operations When Moving the Unit .................................................................................109

Preparing to Move the Machine ................................................................................................ 110
Procedures from Preparing to Move Through Reinstalling ................................................................. 111

Main Specifications ..................................................................................................112

Printing Area...................................................................................................................... 113

Maximum Area ............................................................................................................. 113
Maximum Area When Using Crop Marks ................................................................................ 114

About the Blade.................................................................................................................. 115
Dimensional Drawing ............................................................................................................ 116
Specifications..................................................................................................................... 117

Contents

4

Содержание VersaSTUDIO BN-20A

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды