Roland VC-1HD, Руководство пользователя

Страница: 34 / 44

34
Appendices
Setting item Value Explanation
AUTO SCAN TRANS TIME 0.0 sec– 1.0 sec –4.0 sec
When the Auto Scan function is on, this sets the length of time for
applying a video transition.
A/B MODE
A/B
, PGM/PST This sets the operation mode for video transitions.
FREEZE MODE ALL
, SELECT This sets the operation mode for freezes.
NO SIGNAL BACK BLACK
, BLUE This sets the background color of channels that have no video input.
UNFIT SIGNAL BACK BLACK, BLUE, THRU
This sets the background color of channels on which video of an
incompatible format is input.
When set to “THRU,” video in an unsupported format is output
unchanged, allowing confirmation of the status of the input signal.
Note, however, that the video might contain additional noise artifacts.
DEINTERLACE MODE WEAVE, BOB
This specifies the method used when converting interlaced input
video to progressive video.
COLOR BAR OUTPUT ON, OFF Setting this to “ON” outputs a color bar.
TEST TONE OUTPUT ON, OFF Setting this to “ON” outputs a test tone.
MIDI Rx SOURCE
For information on remote control via MIDI, download and refer to the “V-1HD Remote Control Guide”
(PDF) from the following Roland website.
http://proav.roland.com
MIDI OUT
MITI Tx CHANNEL
MIDI DEVICE ID
MIDI Rx CHANNEL
MIDI Rx TEMPO CLOCK
POWER ON LOAD 1
–8
Selecting a memory number causes the settings at the selected
memory number to be recalled at startup.
PGM LED
RED , GREEN, YELLOW, BLUE,
PURPLE, L.BLUE, WHITE
This specifies the color used when the output video channel
buttons ([A-1]–[A-4], [B-1]–[B-4]) light up.
PST LED
RED, GREEN , YELLOW, BLUE,
PURPLE, L.BLUE, WHITE
This specifies the color used when the buttons for the video channel to
output next ([A-1]–[A-4], [B-1]–[B-4]) light up.
INPUT LED ON , OFF
When set to “ON,” the [A-1]–[A-4] and [B-1]–[B-4] buttons light up,
flash, and go dark as shown below.
Button Input video status
Lighted in white Valid video is input.
Flashing in white Video whose format differs from the [FORMAT]
switch setting is input.
Dark No video is input.
TRANSFORMER LED
ON
, OFF When set to “ON,” the TRANSFORMER buttons light up in white.
AUDIO LED
MASTER OUT , MIC, AUDIO IN,
HDMI 1, HDMI 2, HDMI 3, HDMI 4 This specifies the audio signal monitored by the AUDIO indicator.
MEMORY PANEL LOAD ON, OFF
This sets whether the state of the operation panel is updated (ON)
or not updated (OFF) when a memory is recalled.
EFFECTS TYPE CHANGE ON , OFF
When set to “ON,” effect assignments are changed by holding down
the EFFECTS A [ON] button and turning the [EFFECTS A] knob.
Operation for EFFECTS B is the same.
WIPE TYPE CHANGE
ON
, OFF
When set to “ON,” the wipe transition pattern changes with each
press of the [WIPE] button.
MIX TYPE CHANGE ON , OFF
When set to “ON,” the mix transition pattern changes with each
press of the [MIX] button.
AUTO OFF
ON
, OFF
This sets the Auto Off function on or off.
When set to “ON,” the power to the V-1HD is automatically turned
off if 240 minutes elapse with no operation performed on the unit.
FRAME RATE 59.94, 50 This sets the frame rate.
FACTORY RESET — This returns the unit to its factory defaults.
VERSION — This displays the version of the system program.