Roland VC-1HD, Руководство пользователя

Страница: 19 / 44

19
Video Operations
Switching Automatically (Auto Scan)
The video on channels 1 through 4 is switched
automatically in sequence.
MEMO
5
Any channels carrying no video input are skipped.
5
Switching the video manually is not possible while an
automatic switch is in progress.
1.
Press and hold the [(TAP) BPM] button (for 2
seconds or longer) to display the SETUP menu.
2.
Use the [ ] and [ ] buttons to select “AUTO
SCAN.”
3.
Use the A/B fader to set this to “ON.”
Value Explanation
ON
Video automatic switching is turned on. The
video on channels 1 through 4 is switched
automatically.
OFF
The video automatic switching feature is turned
off.
5
You can use the following SETUP menu items to set the
transition interval for video display and the time applies
to the video transition.
Menu item Explanation
AUTO SCAN
TIME
This sets the display interval for video
within a range of 1 to 120 seconds.
AUTO SCAN
TRANS TIME
This sets the time the video transition
takes, within a range of 0.0 to 4.0 seconds.
* These are effective when a mix or wipe
is selected as the transition effect.
* If the time the video transition takes is longer than
the video display interval, the next transition starts
before the current transition is complete.
4.
Press the [(TAP) BPM] button to quit the menu.
Using a Different Transition Pattern
A variety of transition patterns are available for mix
and wipe transition effects.
To use a different pattern, change the transition
pattern assigned to the [MIX] or [WIPE] button.
1.
Press the [MEMORY] button to display the
MEMORY menu.
2.
Use thee [ ] and [ ] buttons to select “WIPE”
or “MIX.”
3.
Use the A/B fader to change the transition
pattern.
* For a list of transition-pattern types, refer to “Transition
Effects List” (p. 35).
4.
Press the [MEMORY] button to quit the menu.
MEMO
5
When the [WIPE] button is selected, you can change the
transition pattern with each press of the [WIPE] button.
Press and hold the [(TAP) BPM] button
g set “WIPE TYPE
CHANGE” at the SETUP menu to “ON.”
The procedure is similar for the [MIX] button. Set “MIX
TYPE CHANGE” at the SETUP menu to “ON.”