Roland V-800HD MK II, Руководство пользователя

Страница: 23 / 40

23
Video Operations
4.
Move the video fader in the direction opposite to the
direction in step 1.
The output video is switched.
When the video has been switched completely, the lighted buttons for
the PGM position and PST/EFFECT position change places.
MEMO
Directly selecting the video channel at the PGM position of the
video currently being output switches the video with a cut,
regardless of any selection of a transition effect.
Switching in the A/B Mode
The video at the end to which the video fader is flipped is always the
final output.
1.
Move the video fader all the way to one end or the other.
2.
Press a cross-point button at the end to which the video
fader is not flipped to select the preset video (the video to
output next).
Lighted in red: Final output video
Lighted in green: Preset video (the video to be output next)
The preset video appears in the PVW section of the multi-view monitor.
MEMO
5
Channel 9 is used for still-image output. Channel 10 is used when
outputting a still image or monochrome picture (background
color) (p. 16).
5
You can freely assign channels of your choosing to cross-point
buttons. For details, refer to “Changing Cross-point Assignments”
(p. 33).
3.
Press one of the WIPE PATTERN [1] through [7] buttons or
the [MIX] button to select the transition effect.
The selected button lights up.
WIPE PATTERN [1]–[7] buttons
In this transition, the original video is broken into by the
next video.
* You can change the wipe pattern and wipe direction.
Select the [MENU] button g “Transition” g choose one
of the selections from “Wipe Patter 1” through “Wipe
Patter 7” g make settings for “Pattern” and “Direction.”
[MIX] button
The two pictures are blended together as the video is
switched.
4.
Move the video fader in the direction opposite to the
direction in step 1.
The output video is switched.
MEMO
Directly selecting a channel at the final-output end switches the
video with a cut regardless of any transition-effect selection.
Using the [AUTO] or [CUT] Button to Switch Video
Automatically
You can use the [AUTO] or [CUT] button to switch video automatically,
without using the video fader.
* You can perform operations using the [AUTO] and [CUT] buttons
both in the PGM/PST mode and in the A/B mode.
1.
Use the [TIME] knob to set the transition time.
The setting for the video transition time is applied when you use
the [AUTO] button to switch video.
* By factory default, transition times are set using
“seconds” as the unit. You can also use “frames” or
“s frames” as the units for transition times.
Select the [MENU] button
g
“Transition”
g
use “Unit”
to make the setting.
2.
Press the [AUTO] or [CUT] button at the desired timing for
switching the video.
[AUTO] button The picture switches with a transition effect applied.
[CUT] button The picture switches instantly.
MEMO
When you use the [AUTO] or [CUT] button to switch video, the
actual output might come to differ from the position of the
video fader.
Operating the video fader while in this state yields no change in
output until the position of the video fader matches the actual
output.