46
Control Using the TALLY/GPI Connector
Inputting a Control Signal
To operate the V-600UHD remotely using control-signal input, you
first assign the function to a GPI channel (1 through 8).
1.
Select the [MENU] button
&
“System”
&
“GPI,” and
press the [VALUE] knob.
2.
Use the [VALUE] knob to specify the function to
assign to the GPI channel (1 through 8).
&
Details on menu items: p. 42
3.
Press the [MENU] button to quit the menu.
When a control signal is input from an external source, the
assigned function is executed. The GPI trigger is fixed at the
trailing edge (low: On).
Outputting a Tally Signal
A tally signal is output from the connector pin corresponding to the
video channel being output, also including video composition and
transition effects.
Pin layout
5 4 3 2 1
15
16
17
18
19
20
21
22
23
24
25
14
10
11
12
13
9 8 7 6
DB-25 type (female)
Tally output
Trigger method
Open collector
Maximum input
12 V/200 mA
Control input
Trigger method
No-voltage contact (make-contact) triggering
Contact capacity
DC 24 V 0.1 A or higher
Input method
Photocoupler
Pin assignments
Pin No.
Function
Pin No.
Function
1
TALLY 1 PGM
14
TALLY 7 PST
2
TALLY 1 PST
15
TALLY 8 PGM
3
TALLY 2 PGM
16
TALLY 8 PST
4
TALLY 2 PST
17
GND
5
TALLY 3 PGM
18
GPI 1
6
TALLY 3 PST
19
GPI 2
7
TALLY 4 PGM
20
GPI 3
8
TALLY 4 PST
21
GPI 4
9
TALLY 5 PGM
22
GPI 5
10
TALLY 5 PST
23
GPI 6
11
TALLY 6 PGM
24
GPI 7
12
TALLY 6 PST
25
GPI 8
13
TALLY 7 PGM
You can operate the V-600UHD remotely from an external device by inputting a GPI control signal via the TALLY/GPI connector.
And you can output a tally signal from the TALLY/GPI connector.
Specification of the TALLY/GPI Connector
