23
Other Operations
Choose save new
1 .
Select the [MENU] button
&
“System”
&
select the
USB Memory “Parameter Save As,” and press the
[VALUE] knob.
2 .
Specify the file name.
The extension of the file name is “.prm.”
3 .
Select “Save,” and press the [VALUE] knob.
The message “Are you sure?” appears.
If you want to cancel the operation, select “NO,” and press the
[VALUE] knob.
4 .
Select “YES,” and press the [VALUE] knob.
The file (*.prm) is newly saved on the USB flash drive.
5 .
Press the [MENU] button to quit the menu.
MEMO
Still images (p. 15) are not saved in the file (*.prm).
Saving by Overwriting
1 .
Select the [MENU] button
&
“System”
&
select
the USB Memory “Parameter Save,” and press the
[VALUE] knob.
2 .
Select the file that you want to overwrite, select
“Save,” and press the [VALUE] knob.
The message “Are you sure?” appears.
If you want to cancel the operation, select “NO,” and press the
[VALUE] knob.
3 .
Select “YES,” and press the [VALUE] knob.
The file is saved by overwriting.
4 .
Press the [MENU] button to quit the menu.
Recalling
This recalls the settings in the unit’s memories (1-1 through 8-8) that
have been saved on a USB flash drive. Recalling settings overwrites
any values in the unit’s memories.
1 .
Select the [MENU] button
&
“System”
&
select
the USB Memory “Parameter Load,” and press the
[VALUE] knob.
2 .
Select the file that you want to recall, select “Load,”
and press the [VALUE] knob.
The message “Are you sure?” appears.
If you want to cancel the operation, select “NO,” and press the
[VALUE] knob.
3 .
Select “YES,” and press the [VALUE] knob.
The settings are recalled, and the values in the unit’s memories are
overwritten.
4 .
Press the [MENU] button to quit the menu.
Deleting a file on a USB flash drive
1 .
Select the [MENU] button
&
“System”
&
select
the USB Memory “Parameter Delete,” and press the
[VALUE] knob.
2 .
Select the file that you want to delete, select
“Delete,” and press the [VALUE] knob.
The message “Are you sure?” appears.
If you want to cancel the operation, select “NO,” and press the
[VALUE] knob.
3 .
Select “YES,” and press the [VALUE] knob.
The settings are deleted from the USB flash drive.
4 .
Press the [MENU] button to quit the menu.
Saving the Unit’s Settings to File on a USB Flash Drive
You can group together the values in the unit’s memories (1-1 through 8-8) into a single file and save it to a USB flash drive connected to the USB
MEMORY port. You can access the saved file on the USB flash drive and load it into the unit for use when needed.
* When you’re using a USB flash drive for the first time, be sure to format it on the V-600UHD (p. 24).
* Depending on the USB flash drive, recognition of the flash drive might take some time.
