background image

 

2

 

 

 

To resize thickness, move all items on the front cover to left or right

 on the master page.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION

: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR

CAUTION:   TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to the 
presence of uninsulated “dangerous voltage” within the 
product’s enclosure that may be of sufficient magnitude to 
constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in the 
literature accompanying the product.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING - When using electric products, basic precautions should always be followed, including the following:

Read all the instructions before using the product.
Do not use this product near water — for example, near a 
bathtub, washbowl, kitchen sink, in a wet basement, or near 
a swimming pool, or the like.
This product should be used only with a cart or stand that is 
recommended by the manufacturer.
This product, either alone or in combination with an amplifier 
and headphones or speakers, may be capable of producing 
sound levels that could cause permanent hearing loss.  Do 
not operate for a long period of time at a high volume level 
or at a level that is uncomfortable.  If you experience any 
hearing loss or ringing in the ears, you should consult an 
audiologist.
The product should be located so that its location or position 
does not interfere with its proper ventilation.
The product should be located away from heat sources such 
as radiators, heat registers, or other products that produce 
heat.
The product should be connected to a power supply only of 
the type described in the operating instructions or as marked 
on the product.

1.
2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

A.
B.

C.
D.

E.

The power-supply cord of the product should be unplugged 
from the outlet when left unused for a long period of time.
Care should be taken so that objects do not fall and liquids 
are not spilled into the enclosure through openings.
The product should be serviced by qualified service 
personnel when:

The power-supply cord or the plug has been damaged; or
Objects have fallen, or liquid has been spilled into the 
product; or
The product has been exposed to rain; or
The product does not appear to operate normally or 
exhibits a marked change in performance; or
The product has been dropped, or the enclosure 
damaged.

Do not attempt to service the product beyond that described 
in the user-maintenance instructions.  All other servicing 
should be referred to qualified service personnel.

IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.

BLUE: 
BROWN: 

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying 
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.

NEUTRAL
LIVE

For the U.K.

This product may be equipped with a polarized line plug (one blade wider than the other) . This is a safety feature. If you 

are unable to insert the plug into the outlet, contact an electrician to replace your obsolete outlet. Do not defeat the safety 
purpose of the plug.

For Polarized Line Plug

CAUTION:
ATTENTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE 
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU' AU FOND.

For the USA

For Canada

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

–   Reorient or relocate the receiving antenna.
–   Increase the separation between the equipment and receiver.
–   Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–   Consult the dealer or an experienced radio/TV technician for help.

Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.

This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.

For EU Countries

For Canada

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du  Canada.

NOTICE

AVIS

Содержание U-8ST

























































































Отзывы: