manualshive.com logo in svg

Roland TrueVIS SG-300, Руководство пользователя

Поделиться
Скачать
Roland TrueVIS SG-300 Скачать руководство пользователя страница 94

9 2

3

Maintenance

3

Maintenance

If  Colors Are Uneven

Mix ing the Ink  by  Shak ing the P ouch Tray

If ink components precipitate in the ink pouch, colors may be uneven (unevenness in printed colors). If colors 
are uneven, remove the pouch trays, and then shake them gently.

I m p o r t a n t

•  Do not remove the ink pouches. Shake the entire pouch tray. Removing the ink pouches may lead to 

the ink leaking.

•  Before shaking an ink pouch, wipe off any ink from around the mouth of the ink pouch. If you do not 

wipe off the ink, it may splatter when you shake the pouch tray.

•  When you have finished mixing the ink, reinsert the pouch tray immediately. If you take time to reinsert 

the ink tray, the ink trays will be adversely affected.

If  Colors Are Still Uneven

If uneven color issues are not resolved even after shaking the pouch trays, perform super cleaning.

 

"

P .   9 3   " S u p e r   C l e a n i n g "

Содержание TrueVIS SG-300









































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды