manualshive.com logo in svg

Roland TrueVIS SG-300, Руководство пользователя

Поделиться
Скачать
Roland TrueVIS SG-300 Скачать руководство пользователя страница 23

Imp ortant Notes on H andling and Use

1

Machine 

H

ighlights

21

Ink  P ouches

I n k   p o u c h e s   c o m e   i n   v a r i o u s   t y p e s .

•  Use a type that is compatible with the printer.

N e v e r   s u b j e c t   t h e   m a c h i n e   t o   i m p a c t s   o r   a t t e m p t   t o   d i s a s s e m b l e   i t .

•  Never drop the machine or shake it forcefully. The impact may rupture the internal pouches and cause 

the ink to leak.

•  Never attempt to disassemble the machine.
•  Never attempt to refill the ink.
•  If ink gets on your hands or clothing, wash it off as soon as possible. Removal may become difficult if you 

leave such adhered ink untreated.

S t o r a g e

•  Store the machine unopened in a well-ventilated location at a temperature of -5 to 40°C (-23 to 104°F). 

However, do not store the ink pouches for a prolonged period of time in low or high temperature envi-
ronments.

Содержание TrueVIS SG-300









































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды