manualshive.com logo in svg

Roland TrueVIS SG-300, Руководство пользователя

Поделиться
Скачать
Roland TrueVIS SG-300 Скачать руководство пользователя страница 58

B asic P rinting Method

2

B

asic

O

p

eration

5 6

D 

Check  that the screen shown below (the top  menu) is disp lay ed.

If the top menu is not displayed, press [MENU].
If the [PRESS ENTER KEY TO CONTINUE] message appears on the screen, press [ENTER].

W1100mm

E 

Send the outp ut data f rom the comp uter.

Create the output data using drawing application software. For information on how to create the 
data, refer to the documentation of your application software.
To perform cutting or printing and cutting, you have to include the cutting data in the output data. For 
information on how to create cutting data, refer to the documentation for the included software RIP.

M E M O

When you send the output data, "FILLING" or "CLEANING" may be displayed on the screen. These 
indicate the preparation operations performed before output. Output will begin after the time 
displayed on the screen elapses.

I m p o r t a n t :   O u t p u t   i s   n o t   p o s s i b l e   i n   t h e s e   s i t u a t i o n s .

•  The machine does not run when a cover (front, left, or right) is open.
•  Never open a cover (front, left, or right) while output is in progress. Doing so interrupts printing.
•  Data from the computer is not accepted when [SETUP] is dark.
•  Printing does not start until [HEATER] lights. (If both "PRINT HEATER" and "DRYER" are set to "OFF," 

printing is possible even if [HEATER] is not lit.)

 

"

P .   117 ,   " S e t t i n g   t h e   Te m p e r a t u r e   d u r i n g   P r e h e a t i n g "

•  Data from the computer is not accepted when you are not at the top menu.

I m p o r t a n t :   P o i n t s   t h a t   m u s t   b e   o b s e r v e d

•  When you are performing printing, be sure to attach the media clamps. Otherwise the edges of the 

media may warp and catch on the print heads. 

•  During output, do not touch the media. Doing so may obstruct the media feed or cause the media to 

rub against the print heads, which may result in a paper jam or damage to the heads. 

•  Keep the loading lever raised when the machine is not in use.

Imp ortant:  W hen not using the machine,  remove any  media and store it in a suitable environment.

•  If the machine is left with the media loaded, the media may be damaged, which may adversely affect 

printing. When not using the machine, remove any media and store it in a suitable environment.

Содержание TrueVIS SG-300









































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды