Roland RSS AR-200R Скачать руководство пользователя страница 60

Страница: 60 / 72

MIDI Implementation

2. Transmitted data (Media Player Section)
2.1 Transmitted messages while a phrase

is being played back

The stored MIDI message are transmitted When the MIDI phrase will playback after OUT is
set in the MIDI OUT.
In this case, AR-200R is not transmitted MIDI messages which are received.

2.2 Transmitted message which are received.

When THRU is set in the MIDI OUT, AR-200R transmits message which are received.

2.3 Transmitted message which are produced.

When OUT is set in the MIDI OUT, AR-200R transmits the following produced messages.

■

Channel Voice Message

●

Note Off

Status

Second

Third

8nH

kkH

40H

n = MIDI Channel No.: 0H -- FH (ch.1--ch.16)
kk = Note No.: 00H--7FH (0--127)

After the MIDI Phrase is stopped, AR-200R produces Note off message for received
notes remains on.

When Note On is sent at the start of an audio performance, the same note number as that
of the Note On is transmitted. For more information about sending notes, refer to the
Note On section below.

●

Note ON

Status

Second

Third

9nH

kkH

7FH

n = MIDI Channel No.: 0H--FH (ch.1--ch.16)
kk = Note No.: 00H--7FH (0--127)

At the start of the audio phrase performance, the note number defined in the MIDI note
map is sent.In this instance, if multiple note numbers are selected in the phrase, only the
lowest note number is transmitted.

There is no transmission when the Note Send setting is set to “OFF“ (Note Send settings
are available only with the AR-3000R/3000 or ARE-3000).

Data is not output if the MIDI Receive channel setting is “OFF.” When set to 1-16, data is
transmitted only on the selected channel. When set to ALL, data is transmitted on
Channel 1.

There is no transmission during playback of MIDI phrases.

●

Control Change

❍

Hold1 OFF

Status

Second

Third

BnH

40H

00H

n = MIDI Channel No.: 0H--FH (ch.1--ch.16)
*

After the MIDI Phrase is stopped, AR-200R produces Note off message for received
notes remains on.

■

Channel Mode Message

●

All Note Off (Controller No. 1 2 3)

Status

Second

Third

BnH

7BH

00H

n = MIDI channel No.: 0H--FH (ch.1--ch.16)
*

Transmitted message while a phrase is being played back.

2.4 Recognized message for sync

■

System Realtime Message

●

Timing Clock

status
F8H
*

Transmitted message while a phrase is being played back.

●

Start

status
FAH

●

Stop

status
FCH

■

System Common Message

●

Quarter Frame

This is transmitted when Sync Out is set to “MTC.” The time count transmitted is the
time with the start of the song set to “00h00m00s00f00” with the “MTC Offset” and the
“Delay Time” added.

MIDI phrases and pattern phrases are not transmitted when Dual Mono mode is
selected.

status

second

F1H

mmH (= 0nnndddd)

Regarding the Quarter Frame, please refer to “Receive data (Media Player Section) ~Quarter
Frame~.”

■

System Exclusive Message

●

MIDI Time Code

❍

Full Message

This is transmitted when Sync Out is set to “MTC” and the location of the phrase is
moved. The time count transmitted is the time with the start of the song set to
“00h00m00s00f00,” and the “MTC Offset” and the “Delay Time” added.

MIDI phrases and pattern phrases are not transmitted when Dual Mono mode is
selected.

Device ID = 7FH

Status

Data Bytes

Status

F0H

7FH, dev, 01H, 01H

F7H

hrH, mnH, scH, frH

Regarding the MIDI Time Code, please refer to “Receive data (Media Player Section) ~MIDI
Time Code~.”

●

MIDI Machine Control (MMC)