background image

 

32

Controlling the AR-200R from an External Device (Control Input Connectors)

 

Operational Specifications of 
Binary Playback

 

Basic Operation of Binary Playback

 

fig.inp-16

 

Playback:

Specify the phrases using combinations of 0 (Off) and 1 (On) 
signals to Port Nos. 1 through 8, and Port Nos. 11 and 12, and 
input a control signal to the Port No. 9 (START).

 

 

 This plays back the specified phrase.

Stopping:

Input a control signal to Port No. 10 (STOP).

 

 

 This stops playback of the phrase.

The basic operation of Binary Playback is shown below.

 

fig.inp-17

 

Binary specified phrases are played back repeatedly.

Playback is repeated while the start signal is continuously 
input.

You can begin playback of phrases by specifying phrases in 
binary with the start signal continuously being input.

When the START connector control signal switches to Off, 
the current phrase finishes, and then playback is stopped.

No action results when a new start signal is input while a 
phrase is being played back.

 

AR-200R Settings

 

Selecting the Control Input Mode

 

Set the MODE switches on the AR-200R’s bottom panel to 
select “BINARY PLAYBACK” from the control input modes 
(PLAYBACK BY CARD DATA/DIRECT PLAYBACK/
BINARY PLAYBACK/INTERVAL PLAYBACK).

 

* You cannot achieve control input playback merely by 

connecting a device to the port. Be sure to set the control input 
mode and match the method used for connecting to the 
connectors.

 

Procedure for Setting the Control Input Mode

 

1.

 

Turn off the power of the AR-200R.

 

2.

 

Set the MODE switches on the AR-200R’s bottom panel 
as shown below.

SW1: OFF

SW2: ON

 

3.

 

Turn on the power of the AR-200R.

 

* Use a pointed object to change the ON/OFF settings of the 

MODE switches.

 

To Specify Phrases with Binary 
Signals

 

Example: Specifying Phrase 0112 (Phrase #: 0112)

 

1.

 

Convert the phrase number to a binary signal number.

“0” (Off)

“1” (On)

 

“Phrase Number / Binary Signal chart”

 

 (p. 33)

The phrase number “0012” becomes the binary signal 
“01110000.”

With the above step, Phrase No. 0112 is converted to:

 

fig.inp-18

 

Input of binary specifications should be completed in no 
more than 50 milliseconds.

AUDIO OUTPUT

Binary Specification

Port No.1--8

START Port

0001

0001

AUDIO OUTPUT

Binary Specification

Port No.1--8

START Port

0001

0001

0002

Disabled

0002

0001

0003

0003

   8   7   6   5   4   3   2   1   
   0   1   1   1   0   0   0   0

Phrase Number (Binary)

Port No.

INPUT Signal

AR-200R_e.book 32 ページ 2010年7月1日 木曜日 午前11時24分

Содержание RSS AR-200R









































































Отзывы: