100
Chapter 4 Practice Functions
Chapter 4
Setting Markers for Repeated Practice
(Marker)
By setting markers at points in a song that you want to practice repeatedly, you can
then easily go to and repeat play back of the selected measures.
■
Placing a Marker within a Song
You can place two separate markers (Marker A and Marker B) in one song. These
markers are placed at the beginning of a measure to make the beginning and end of
a section of music. Placing markers is a handy way to start playback at the same
place as many times as you like. You can add markers or move to a marker even
while playback is in progress.
Access the Marker screen
First, select the song in which you’ll set the markers (p. 77).
1.
Press the [Menu] button.
Touch
to switch the screens.
2.
Touch <Marker>.
The Marker screen appears.
fig.d-marker.eps_60
Placing Markers
3.
Go to the measure where you want to set a marker using the [
(Bwd)]
and [
(Fwd)] buttons.
4.
Touch <- - -> for Marker A.
Marker A is placed at the beginning of the measure you selected.
“- - -” on the screen will change to the number of the measure where you placed the
marker.
5.
In the same way, touch the Marker B <- - -> to set Marker B.
It is not possible to assign marker B to the same location or a measure before marker A.
Markers can also be assigned
in units of beats rather than
measures. Refer to “Placing a
Marker in the Middle of a
Measure” (p. 160).
KR-17_15_e.book 100 ページ 2004年12月6日 月曜日 午後1時54分