Roland Jupiter-80 Скачать руководство пользователя

Страница: 6 / 108

IMPORTANT NOTES

Additional Precautions

• Please be aware that the contents of memory can

be irretrievably lost as a result of a malfunction,

or the improper operation of the unit. To protect

yourself against the risk of loosing important data,

we recommend that you periodically save a backup

copy of important data you have stored in the unit’s

memory on USB flash drives.

• Unfortunately, it may be impossible to restore

the contents of data that was stored in the unit’s

memory and USB flash drives once it has been lost.

Roland Corporation assumes no liability concerning

such loss of data.

• Use a reasonable amount of care when using the

unit’s buttons, sliders, or other controls; and when

using its jacks and connectors. Rough handling can

lead to malfunctions.

• Never strike or apply strong pressure to the display.

• When connecting / disconnecting all cables, grasp

the connector itself—never pull on the cable. This

way you will avoid causing shorts, or damage to the

cable’s internal elements.

• A small amount of heat will radiate from the unit

during normal operation.

• To avoid disturbing your neighbors, try to keep

the unit’s volume at reasonable levels. You may

prefer to use headphones, so you do not need to be

concerned about those around you.

• When you need to transport the unit, package it

in the box (including padding) that it came in, if

possible. Otherwise, you will need to use equivalent

packaging materials.

• Use only the specified expression pedal (EV-5; sold

separately). By connecting any other expression

pedals, you risk causing malfunction and/or

damage to the unit.

• Some connection cables contain resistors. Do not

use cables that incorporate resistors for connecting

to this unit. The use of such cables can cause the

sound level to be extremely low, or impossible

to hear. For information on cable specifications,

contact the manufacturer of the cable.

• The usable range of D Beam controller will become

extremely small when used under strong direct

sunlight. Please be aware of this when using the D

Beam controller outside.

• The sensitivity of the D Beam controller will change

depending on the amount of light in the vicinity of

the unit. If it does not function as you expect, adjust

the sensitivity as appropriate for the brightness of

your location (p. 84).

Handling External Memories

• Carefully insert the USB flash drives all the way

in—until it is firmly in place.

• Never touch the terminals of the USB flash drives.

Also, avoid getting the terminals dirty.

• USB flash drives are constructed using precision

components; handle the cards carefully, paying

particular note to the following.

• To prevent damage to the cards from static

electricity, be sure to discharge any static
electricity from your own body before
handling the cards.

• Do not touch or allow metal to come into

contact with the contact portion of the cards.

• Do not bend, drop, or subject cards to strong

shock or vibration.

• Do not keep cards in direct sunlight, in closed

vehicles, or other such locations.

• Do not allow cards to become wet.

• Do not disassemble or modify the cards.

Handling CDs / DVDs

• Avoid touching or scratching the shiny underside

(encoded surface) of the disc. Damaged or dirty

DVD discs may not be read properly. Keep your

discs clean using a commercially available DVD

cleaner.

Copyrights

• Recording, duplication, distribution, sale, lease,

performance, or broadcast of copyrighted material

(musical works, visual works, broadcasts, live

performances, etc.) belonging to a third party in

part or in whole without the permission of the

• Do not use this product for purposes that could

infringe on a copyright held by a third party. We

assume no responsibility whatsoever with regard to

any infringements of third-party copyrights arising

through your use of this product.

• The copyright of content in this product (the

sound waveform data, style data, accompaniment

patterns, phrase data, audio loops and image data)

is reserved by Roland Corporation and/or Atelier

Vision Corporation.

• Purchasers of this product are permitted to utilize

said content for the creating, performing, recording

and distributing original musical works.

• Purchasers of this product are NOT permitted to

extract said content in original or modified form,

for the purpose of distributing recorded medium

of said content or making them available on a

computer network.

Licenses / Trademarks

• MMP (Moore Microprocessor Portfolio) refers to a

patent portfolio concerned with microprocessor

architecture, which was developed by Technology

Properties Limited (TPL). Roland has licensed this

technology from the TPL Group.

• MPEG Layer-3 audio compression technology

is licensed from Fraunhofer IIS Corporation and

THOMSON Multimedia Corporation.

• MatrixQuest™ 2010 TEPCO UQUEST, LTD. All rights

reserved.

• “JUPITER” is a registered trademark of and is

licensed by K.H.S. MUSICAL INSTRUMENT CO. LTD.

in the United States and other countries.

• Cakewalk is a registered trademark of Cakewalk,

Inc. in the United States.

• SONAR is a trademark of Cakewalk, Inc.

• Company names and product names appearing

in this document are registered trademarks or

trademarks of their respective owners.

Содержание Jupiter-80













































































































Результаты поиска

Содержание Jupiter-80

Отзывы:

Похожие инструкции для Jupiter-80

Бренды по названию

Популярные бренды

Roland Jupiter-80, Руководство пользователя

Результаты поиска

Содержание Jupiter-80

Отзывы:

Похожие инструкции для Jupiter-80

Бренды по названию

Популярные бренды