Roland Jupiter-80 Скачать руководство пользователя

Страница: 39 / 108

oduc

tion

Pla

ying S

ounds

Editing S

ounds

ther C

venien

Func
tions

Connec

ting O

ther

Equipmen

ppendix

A “split” is a setup in which the keyboard is divided into zones, each

playing a different Part.

Lower Split Point (B3)

Lower Part

Upper Part

Solo Split Point (C6)

Solo Part

Splits can be either “splits,” which divide the keyboard into an Upper

Part and Lower Part, or “Solo Splits,” which divide the keyboard

into a Solo Part and Upper Part. The point at which the keyboard is

divided is called either the “Lower Split Point” or “Solo Split Point.”

If Split is turned on, keys to the right of the Lower Split Point will

play the sound of the Upper Part, and keys to the left will play the

sound of the Lower Part.

The Lower Split Point key itself (B3) is the highest key of the Lower

Part (it is included in the Lower Part).

If Solo Split is turned on, keys to the right of the Solo Split Point will

play the sound of the Solo Part, and keys to the left will play the

sound of the Upper Part.

The Solo Split Point key itself (C6) is the lowest key of the Solo Part

(it is included in the Solo Part).

MEMO

• You can change the Lower Split Point and the Solo Split Point

(p. 40).

• The split settings are saved in the Registration.
• For more about split for the Percussion Part, refer to “How Split

and Parts are Related” (p. 40).

Turning Split On

Press the [SPLIT] button or [SOLO SPLIT] button .

Split or Solo Split will turn on (the button will light).
The screen will indicate the split status.

Lower Part

Upper Part

Solo Part

Solo Split Point

Lower Split Point

To turn it off, press the [SPLIT] button or [SOLO SPLIT]

button once again .

Split or Solo Split will turn off (the button will go out).

Split Performance

Checking Splits and Key Ranges

Touch the keyboard graphic in the Registration screen to check the split and key range settings (p. 34).

Turns split on/off.

Turns Solo Split on/off.

Specifies the

key range.

Indicates the key range (sound is

produced in the specified region).

Turns layer on/off.

Specifies the

type of tone.

Specifies the

tone.

Turn the Part

on/off.

Содержание Jupiter-80













































































































Результаты поиска

Содержание Jupiter-80

Отзывы:

Похожие инструкции для Jupiter-80

Бренды по названию

Популярные бренды

Roland Jupiter-80, Руководство пользователя

Результаты поиска

Содержание Jupiter-80

Отзывы:

Похожие инструкции для Jupiter-80

Бренды по названию

Популярные бренды