Roland Jupiter-80 Скачать руководство пользователя страница 96

Страница: 96 / 108

Controlling Visuals

Visual Control Settings

Press the [VISUAL CONTROL] button .

The Visual Control screen (p. 34) will appear.

Set the following parameters .

Parameter

Value

Explanation

Clip Ch

1–16

Specifies the MIDI channel used to switch images.

Effect Ch

1–16

Specifies the MIDI channel used to switch video effects.

Playback Speed Ctrl

OFF, CC01–CC31, CC64–CC95, Bender,

Ch Aftertouch

Specifies the controller used to change the video playback speed.

Playback Speed Range

0.1–1.0–2.0, 0.5–1.0–2.0,

0.0–1.0–4.0, 0.5–1.0–4.0,

0.0–1.0–8.0, 0.5–1.0–8.0,

0.0–1.0–16.0, 0.5–1.0–16.0,

0.0–1.0–32.0, 0.5–1.0–32.0,

0.0–2.0–4.0, 0.0–4.0–8.0,

0.0–8.0–16.0, 0.0–16.0–32.0,

-2.0–1.0–4.0, -6.0–1.0–8.0

Specifies the range in which the video playback speed will change.
The three values specify the playback speed (as a multiple of normal speed) when the

controller selected by Playback Speed Ctrl is at the minimum value, center value, and

maximum value, respectively.

Dissolve Time Ctrl

OFF, CC01–CC31, CC64–CC95, Bender,

Ch Aftertouch

Specifies the controller used to control the dissolve time (video switching time).

Effect Ctrl 1

OFF, CC01–CC31, CC64–CC95, Bender,

Ch Aftertouch

Specifies the controller used to control the video effect.

Effect Ctrl 2
Effect Ctrl 3

Keyboard Range Lower

E1–G7

Specifies the range of keys that will switch images.

Keyboard Range Upper

Note Message Enabled

OFF, ON

Turn this ON if you want note data to switch images. Normally, program change messages

are used to switch images, so you would leave this OFF.

Local Sw

OFF, ON

Specifies whether the JUPITER-80 will (ON) or will not (OFF) produce sound when you play

notes in the zones specified for Keyboard Range Lower and Keyboard Range Upper.

* The Local Sw setting is not saved. It will automatically be ON when you turn on the

power.

To save the settings, touch <SYSTEM WRITE> .

MEMO

Use the system setting “Visual Control Mode” (p. 86) to specify whether Visual Control is being used to control a MIDI Visual Control compatible

device or a V-LINK compatible device.

Содержание Jupiter-80













































































































Результаты поиска

Содержание Jupiter-80

Отзывы:

Похожие инструкции для Jupiter-80

Бренды по названию

Популярные бренды

Roland Jupiter-80, Руководство пользователя

Результаты поиска

Содержание Jupiter-80

Отзывы:

Похожие инструкции для Jupiter-80

Бренды по названию

Популярные бренды