manualshive.com logo in svg

Roland E-50, E-60, Руководство пользователя

На нашем сайте вы можете бесплатно скачать руководство пользователя Roland E-50, E-60. Это важное руководство содержит всю необходимую информацию о функциях и возможностях данного устройства. Не забудьте загрузить его с {название вебсайта}.

Поделиться
Скачать
background image

MIDI

190

r

E-60/E-50

 Music Workstation

■

CHANNEL (1~16)

Allows you to assign a MIDI receive channel to the selected 
part. The default settings usually work best, but you are 
most welcome to change them.

Note: 

Unless you have a very good reason to do otherwise, we 

suggest using the same TX and RX channel numbers for a part.

Note: 

Assigning the same channel to two or more parts is usu-

ally not a very good idea.

■

SHIFT (–48~48)

This parameter allows you to transpose the received note 
messages before sending them to the E-60/E-50’s tone 
generator. The maximum possible transposition is four 
octaves up (48) or down (–48). Each step represents a semi-
tone.

■

LIMIT HIGH/LIMIT LOW (C–~G9)

“LIMIT HIGH” and “LIMIT LOW” allow you to set the note 
range to be received. If not all note messages received on a 
given MIDI channel should be played by the selected E-60/
E-50 part, narrow down the range.

Note: 

The LOW LIMIT value cannot be higher value than HIGH 

LIMIT (and vice versa). 

The data filters of the RX section allow you to specify 
whether (ON) or not (OFF) the messages in question 
should be received.

Press the 

[RX¥EVENT]

 field to open the following 

pop-up window:

The RX events are the same as the TX events, except 
for the “CAF” parameter (reception of Channel After-
touch messages), which can be received – or filtered.

Press the 

[Back]

 field and save your settings to a 

MIDI Set; —or—
Press the 

[EXIT]

 button to return to the main page.

MIDI System parameters

The following MIDI parameters usually apply to the 
E-60/E-50 as a whole, even though some of them are 
rather specific, as you will notice.

Press the 

[SYSTEM]

 field and use PAGE 

[ø][˚]

 to select 

the page that contains the parameter you want to edit.

The SYNC parameters allow you to specify whether or 
not the E-60/E-50 should send MIDI real-time mes-
sages when you start the Arranger or Recorder/
sequencer. This allows you to synchronize external 
instruments or (software) sequencers with your E-60/
E-50. 

Just as a reminder: “TX” means “transmit” and “RX” 
stands for “receive”.

■

SYNC TX

● 

START/STOP—

If you activate this option, the E-60/E-50 

sends start or stop messages when you start (or stop) 
Arranger (STYLE) or song (SONG) playback. (The 
Recorder/sequencer furthermore transmits “Continue” 
messages.)

● 

CLOCK—

This option means that the Arranger (STYLE) or 

Recorder/sequencer (SONG) sends MIDI Clock messages 
that tell the receiving instrument or MIDI device which 
tempo to choose.

● 

SONG POSITION (only for SONG)—

If you switch this 

parameter on, the Recorder/sequencer sends Song Posi-
tion Pointer (SPP) messages that indicate the current 
playback position.

Note: 

See your external sequencer’s, etc., manual to find 

out whether it accepts Song Position Pointer messages.

■

SYNC RX

The SYNC RX parameters allow you to specify 
whether and how the Arranger (STYLE) and/or 
Recorder/sequencer (SONG) should be synchronized 
to external sequencers, drum machines, etc. The 
available options are: 

● 

Auto—

This is a good setting for remote control of song 

or Style playback (using a PK-5A dynamic MIDI pedal 
board, for example). If the E-60/E-50 receives a MIDI 
Start message (FA), it waits for Clock messages that 
specify the tempo. If those Clock messages are not 
received (a PK-5A, for instance, doesn’t send them), the 
E-60/E-50 starts playback using its internal tempo. If, 
however, Clock messages (F8) follow after the Start mes-
sage, the E-60/E-50 uses the external tempo. You can 
nevertheless go on using the Recorder/sequencer or 
Arranger without MIDI Start/Clock messages, which is 
not possible when you select “MIDI”.

MIDI RX

RX EVENT

SYNC parameters

E-60_50_OM_UK.book  Page 190  Thursday, June 22, 2006  10:06 AM

Содержание E-50, E-60





























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для E-50, E-60

Omicron DANEO 400 User Manual preview
DANEO 400
Бренд: Omicron Страницы: 80
E Instruments E500 Quick Manual preview
E500
Бренд: E Instruments Страницы: 2
Hama TH-200 Operating Instruction preview
TH-200
Бренд: Hama Страницы: 6
Navman A300 Sport.Tool Specification preview
A300 Sport.Tool
Бренд: Navman Страницы: 1
Vaisala HUMICAP HMP155 Quick Manual preview
HUMICAP HMP155
Бренд: Vaisala Страницы: 2
Yamaha THR30II Wireless Quick Manual preview
THR30II Wireless
Бренд: Yamaha Страницы: 2
A&D MX-50 Instruction Manual preview
MX-50
Бренд: A&D Страницы: 39
Badger Meter Trimble Ranger 3 Installation Manual preview
Trimble Ranger 3
Бренд: Badger Meter Страницы: 20
A&D FX-i Series Quick Start Manual preview
FX-i Series
Бренд: A&D Страницы: 38
L.R. Baggs M1 ACTIVE Installation Manual & Users Manual preview
M1 ACTIVE
Бренд: L.R. Baggs Страницы: 6
Princeton Instruments HRS-300 Operating Instructions Manual preview
HRS-300
Бренд: Princeton Instruments Страницы: 28
Digitimer DS7A Operator'S Manual preview
DS7A
Бренд: Digitimer Страницы: 58
ECEFAST DH-TDS100H Instruction Manual preview
DH-TDS100H
Бренд: ECEFAST Страницы: 93
Lasertec LDM120 Instruction Manual preview
LDM120
Бренд: Lasertec Страницы: 24
Cardinal Gates Victoreen 948A-40 Instruction Manual preview
Victoreen 948A-40
Бренд: Cardinal Gates Страницы: 16
LaserLiner DampCheck Manual preview
DampCheck
Бренд: LaserLiner Страницы: 64
Samoa 415000 Technical Service Manual preview
415000
Бренд: Samoa Страницы: 12
Vutlan VT325 Manual preview
VT325
Бренд: Vutlan Страницы: 17

Бренды по названию

Популярные бренды

Загрузить еще бренды