Roland E-50, E-60 страница 207 Скачать руководство пользователя

Страница: 207 / 220

Appendix

E-60/E-50 Music Workstation

207

40. Flanger/DLY

This effect connects a flanger and a delay in parallel.

●

Flanger Pre Delay (0.0~100.0ms)—

Adjusts the delay time

from when the direct sound begins until the flanger sound
is heard.

●

Flanger Rate (0.05~10.0Hz)—

Frequency, i.e. modulation

speed.

●

Flanger Depth (0~127)—

Modulation intensity.

●

Flanger Feedback (–98%~0~98%)—

Adjusts the propor-

tion of the flanger sound that is fed back into the effect.
Negative (–) settings will invert the phase.

●

Flanger Balance (D100:0W, D50:50W, D0:100W)—

Volume balance between the direct sound (D) and the
flanger sound (W).

●

Delay Time (0.0~500.0ms)—

Adjusts the time until the

delay is heard.

●

Delay Feedback (–98%~0~98%)—

Adjusts the amount of

the delay sound that’s fed back into the effect. Negative (–)
settings invert the phase.

●

Delay HF Damp (200~8000Hz, Bypass)—

Adjusts the fre-

quency above which sound fed back to the effect is filtered
out. If you don’t want to filter out any high frequencies, set
this parameter to BYPASS.

●

Delay Balance (D100:0W, D50:50W, D0:100W)—

Adjusts

the volume balance between the sound that is sent
through the delay (W) and the sound that is not sent
through the delay (D).

●

Level (0~127)—

Output level.

41. CHO/Flanger

This effect connects a chorus and a flanger in parallel.

●

Chorus Pre Delay (0.0~100.0ms)—

Adjusts the delay

between the incoming direct signal and the moment when
the chorus starts working.

●

Chorus Rate (0.05~10.0Hz)—

Modulation frequency of the

chorus effect.

●

Chorus Depth (0~127)—

Modulation intensity of the cho-

rus effect.

●

Chorus Balance (D100:0W, D50:50W, D0:100W)—

Vol-

ume balance between the direct sound (D) and the chorus
sound (W).

●

Flanger Pre Delay (0.0~100.0ms)—

Adjusts the delay time

from when the direct sound begins until the flanger sound
is heard.

●

Flanger Rate (0.05~10.0Hz)—

Modulation frequency of

the flanger effect.

●

Flanger Depth (0~127)—

Modulation intensity of the

flanger effect.

●

Flanger Feedback (–98%~0~98%)—

Adjusts the propor-

tion of the flanger sound that is fed back into the effect.
Negative (–) settings will invert the phase.

●

Flanger Balance (D100:0W, D50:50W, D0:100W)—

Volume balance between the direct sound (D) and the
flanger sound (W).

●

Level (0~127)—

Output level.

E-60_50_OM_UK.book Page 207 Thursday, June 22, 2006 10:06 AM

Содержание E-50, E-60





























































































































































































































Результаты поиска

Содержание E-50, E-60

Отзывы:

Похожие инструкции для E-50, E-60

Бренды по названию

Популярные бренды

Roland E-50, E-60, Руководство пользователя

Результаты поиска

Содержание E-50, E-60

Отзывы:

Похожие инструкции для E-50, E-60

Бренды по названию

Популярные бренды