Roland Color CAMM PC-50, Руководство пользователя

Страница: 20 / 25

18
Cleaning with cleaning sheet
Soiling which cannot be removed by ordinary cleaning is removed using a cleaning sheet.
NOTICE
• Do not use any cleaning sheet that has a damaged surface such as cuts, tears or creases.
• The printing head can be damaged by dust.
• The Pinch rollers should be set over the black bands at either end of the sheet, to ensure that the head is
restricted to the center cleaning area of the sheet and cannot pass over marks left by the pinch rollers.
• Store the cleaning sheet in a clean place and wipe the cleaning surface with a "lint free" cloth before use.
LOAD
the cleaning sheet
Matt face is up side
Lower the sheet loading levers to secure
the material in place.
4
REMOVE
the blade holder
2
the ink-ribbon
cartridge
TAKE OUT
1
5
Keep pushing
the CLEANINIG key,
and switch on
the power
3
Set the Right Hand
pinch roller to the right
hand limit of its travel
Press the SETUP key
6
Head cleaning is finished when the
carriage stops moving.
This is the side of the cleaning surface (non glossy surface)! 光沢の無い面がクリーニング面です。
Pinch rollers (levers)
Cleaning sheet
Grit roller
Position of the sheet and pinch rollers (levers)
shown from the top
Right side of
the sheet to be
placed at front
and rear guide
lines
7
After cleaning has finished, switch off the power and remove the sheet.
10 Care and Maintenance