Roland Color CAMM PC-50, Руководство пользователя

Страница: 11 / 25

9
6
Use the same procedure to change to the
BLACK (CR-BK)
and
YELLOW (CR-YE)
ribbon cartridges.
The CHANGE LED
blink
5
When the CYAN printing is
finished, the carriage indicates
the next color
(BLACK) and
stops.
4
Replace the
MAGENTA (CR-
MG)
cartridge with the
CYAN
(CR-CY) cartridge, then press
the CHANGE key.
CYAN
(CR-CY)
3
When the
MAGENTA
printing is finished, the
carriage indicates the next
color
(CYAN) and stops.
2
First install the MAGENTA
(CR-MG)
ribbon cartridge.
MAGENTA
(CR-MG)
Press the CHANGE key.
1
When data is sent, the
carriage first specifies
MAGENTA and stops.
The CHANGE LED
blink
The CHANGE LED
blink
* If any of the four colors (C, M, Y, or K) is not used, the PC-50 does not stop at that color.
Special color Printing
This is used to add emphasis to some areas, or when printing with limited colors. Special-color ribbon cartridges are sold separately.
When the ribbon cartridge needs to be changed, the carriage stops at
SPECIAL COLOR
.
For more details, please refer to the operator's manual for the software driver, or to online help.
5 Basic Operation
When CR-CY, MG, YE, and BK ribbon cartridges are used for printing, the PC-50 performs printing in the following color sequence:
MAGENTA (M) CYAN (C) BLACK (K) YELLOW (Y)
Follow the steps below to install and change the ribbon cartridges.