Roland Aproll MDX-540, Руководство пользователя

Страница: 70 / 120

4-4 Starting Cutting (NC-code Mode)

Move the tool to the location you want
to make the origin.

P. 48 "3-4 Moving the Tool"

Select [G54].
Select [XYZ Origin].
Click [Apply].
Click [Close].
Important Note on EXOFS
After setting the origin, never make any setting for EXOFS. One of the effects of EXOFS is to shift the origin. It is important to
note that making this setting without considering the consequences make cause the origin to move to an unintended location.
We recommend leaving EXOFS at the machine coordinates (X0, Y0, Z0) unless you have a particular reason for changing it.

For more information about EXOFS, refer to the "NC Code Reference Manual."
Using Axis Specification
The axis or axes you selected in step

- are the target of this setting. [XYZ Origin] makes the settings for all axes (X, Y, and
Z) simultaneously, but [Z Origin] makes the setting for the X axis only, leaving the Y and Z axes unchanged.
Using this lets you make the settings for the respective axes separately. For instance, you can set the X- and Y-axis origins
aligned with a side surface of the workpiece, and set the Z-axis origin at the workpiece's top surface.
Operation Using the Handy Panel
You can also perform this operation using the handy panel.

P. 77 "Chapter 5 Handy Panel"
68
Chapter 4 Getting Ready for and Performing Cutting