Roland Aproll MDX-540 Скачать руководство пользователя страница 67

Страница: 67 / 120

4-3 Starting Cutting (RML-1 Mode)

Starting Cutting

WARNING

Be sure to check carefully to ensure that the data sent from the computer and

the selected command mode are correct, the locations of the origins are without

error, and the cutting parameters match the workpiece.

Errors or mistakes may cause the tool to break and be thrown off forcefully, leading

to danger of injury.

WARNING

Never output NC codes using this procedure.

This procedure is exclusively for the RML-1 mode. An error or mistake here may

result in unintended operation and is extremely dangerous. Select it with care.

When the machine receives the cutting data from the computer, the spindle begins to rotate and cutting starts. The feed
rate and the speed of spindle rotation are determined by the cutting data received.

Procedure



Make sure the machine is in the RML-

1 mode.



P. 45 "3-3 Selecting the Command Mode"



Close the spindle cover.

Chapter 4 Getting Ready for and Performing Cutting

Содержание Aproll MDX-540

























































































































Результаты поиска

Содержание Aproll MDX-540

Отзывы:

Roland Aproll MDX-540, Руководство пользователя, Страница: 67 / 120

Результаты поиска

Содержание Aproll MDX-540

Отзывы: