Roland Aproll MDX-540, Руководство пользователя, Страница: 33 / 120

31
2-2 Installation
Emplacement and Installation Operations
WARNING Unloading and emplacement are operations that must be performed by 4 persons
or more.
Tasks that require undue effort when performed by a small number of persons may
result in physical injury. Also, if dropped, such items may cause injury.
The weight of the machine alone is 102 kg (225 lb.). Perform unloading and emplacement with care. Using a lifter or other
load-handling equipment is recommended.
Installation Environment
Install in a quiet, stable location offering good operating conditions. An unsuitable location can cause accident, fire, faulty
operation, or breakdown.
WARNING
Install the machine in a location that is level, stable, and able to bear the weight
of the machine.
The total weight including the stand and other optional items may reach 300 kg
(650 lb.) or more. Installation in an unsuitable location may cause a major accident,
including tipover, fall, or collapse.
WARNING Never install in a location exposed to open flame.
Cutting waste may ignite. Powdered material is extremely flammable, and even
metal material may catch fire.
WARNING
Never install close to any flammable object or in a gas-filled location.
Combustion or explosion may be a danger.
WARNING Never install out of doors or in any location where exposure to water or high
humidity may occur.
Doing so
may result in fire or electrical shock.
WARNING Position so that the power plug is within immediate reach at all times.
This is to enable quick disconnection of the power plug in the event of an emergency.
Install the machine next to an electrical outlet. Also, provide enough empty space
to allow immediate access to the electrical outlet.

Never location in a location subject to wide fluctuations in temperature or humidity.

Never install in a location subject to shaking or vibration.

Never install in a locations where the floor is tilted, not level, or unstable.

Never install in a dusty or dirty location.

Never install in a location exposed to direct sunlight or near air-conditioning or heating equipment.

Never install in a location exposed to considerable electrical or magnetic noise, or other forms of electromagnetic en-
ergy.

Never install in an environment where silicone substances (oil, grease, spray, etc.) are present.
Chapter 2 Emplacement and Installation