manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Заметки по обслуживанию, Страница: 3 / 288

Поделиться
Скачать
Roland Advanced Jet AJ-1000 Скачать руководство пользователя страница 3

To Ensure Safe Work

About 

 and 

 Notices.

Used for instructions intended to alert the operator to the risk of death

or severe injury should the unit be used improperly.

Used for instructions intended to alert the operator to the risk of injury

or material damage should the unit be used improperly.

* material damage refers to damage or other adverse effects caused

with respect to the home and all its furnishings, as well to domestic

animals or pets.

About the Symbols

The 

 symbol alerts the user to items that must never be carried out (are

forbidden).  The specific thing that must not be done is indicated by the design
contained within the circle.
The symbol at left means not to touch.

The 

 symbol alerts the user to things that must be carried out.  The specific

thing that must be done is indicated by the design contained within the circle.  The
symbol at left means the power-cord plug must be unplugged from the outlet.

The 

 symbol alerts the user to important instructions or warnings.  The specific

meaning of the symbol is determined by the design contained within the triangle.
The symbol at left means “danger of electrocution”.

In addition to the 

 and 

 symbols, the symbols shown below are  also used.

: Tips and advise before the adjustment.

Содержание Advanced Jet AJ-1000

































































































































































































































































































Отзывы:

Нет отзывов