manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Заметки по обслуживанию, Страница: 177 / 288

Поделиться
Скачать
Roland Advanced Jet AJ-1000 Скачать руководство пользователя страница 177

4-30

Move Head downward to the position where the surface

of Head contacts the cap when being seen crossly, then

press [ENTER] to update the adjustment value.

-When you press [   ] key, Head moves  downward in 0.25mm

unit.

-When you press [    ] key, Head moves to the highest position

where the value +2.00mm.

-When you press [     ] key, the adjustment value is not updated

and the capping is carried out and then exiting the menu.

Heads are capped and you can go out from the menu without

updating the adjustment value.

5

Head moves to the position where the value is +2.00mm.

It is only possible to move Head stepwise downward.

When you move Head upward,  press [      ] key to move

Head upper end once and then move downward.

4

If it is difficult to see whether Head makes

contact with the cap, irradiate Head and Cap

Top with a penlight.

In this case, move down Head while irradiating

the back plate of Head Carriage through the

gap between Head and the cap.  When the

light on the back plate of Head Carriage

cannot be seen, this means that Head makes

contact with the cap.

Содержание Advanced Jet AJ-1000

































































































































































































































































































Отзывы:

Нет отзывов