manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Заметки по обслуживанию, Страница: 276 / 288

Поделиться
Скачать
Roland Advanced Jet AJ-1000 Скачать руководство пользователя страница 276

7-24

1

Perform the HEAD WASH.

[     ] 

[     ] 

SERVICE MENU

SUB MENU

SUB MENU

HEAD WASH

HEAD WASH

    123456

[ENTER] 

[     ] 

EMPTY
        DRAIN BOTTLE

7-4  Preparation for Transportation 2

This is the procedure of the preparation when transporting the machine with the cleaning liquid filled in
it.
If the power can not be turned on again within 48 hours, take this procedure for the preparation. Make
sure to keep the ambient temperature during the transportation between 5 and 40 

o

C.

If the ambient temperature can be kept 30 

o

C or below, the machine can be kept safe up to about 72

hours without turning on the power even if it is transported without removing the ink.

WASHING HEAD..

>>

Turn on the SUB POWER SW while pressing the

Left, Right and Down keys to enter the SERVICE

MODE.

Select [SERVICE MENU] > [SUB MENU] > [HEAD

WASH]

 and press the [ENTER] key.

Press the [ENTER] key.

The ink in the Sub tanks is delivered back to the Ink

cartridges. (It takes about 70 sec.)

Empty the DRAIN BOTTLE after "EMPTY DRAIN

BOTTLE" is displayed on the LCD.

1)

2)

3)

Содержание Advanced Jet AJ-1000

































































































































































































































































































Отзывы:

Нет отзывов