manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Заметки по обслуживанию, Страница: 208 / 288

Поделиться
Скачать
Roland Advanced Jet AJ-1000 Скачать руководство пользователя страница 208

5-1

(Front Side of the machine)

(Left Side)

INK  CARTRIDGE COVER SENSOR

It detects whether the Ink Cover is opened or closed.

(Right Side)

  5  Supplemental Information

5-1  SENSOR MAP

(Center of the machine)

THERMOSTAT

(BED FRONT HEATER L)

If the Heater exceeds the limit

temperature, it stops the power

supply.

GRIT ENCODER

It detects the rotation position of the Grit Roller.

MAINTENANCE COVER SENSOR

It detects whether the Maintenance Cover is opened

or closed.

FRONT COVER SENSOR

It detects whether the Front Cover is opened or

closed.

THERMOSTAT

(BED FRONT HEATER R)

If the Heater exceeds the limit

temperature, it stops the power

supply.

THERMOSTAT (PLATEN HEATER)

If the Heater exceeds the limit temperature, it stops the power supply.

THERMOSTAT

(DRYER HEATER R)

If the Heater exceeds the limit

temperature, it stops the power

supply.

THERMOSTAT

(DRYER HEATER L)

If the Heater exceeds the limit

temperature, it stops the power

supply.

LIMIT SENSOR

It detects the origin of the SCAN direction.

THERMISTOR (PLATEN HEATER)

It measures the temperature of the Heater.

THERMISTOR

(BED FRONT HEATER)

It measures the temperature of the

Heater.

THERMISTOR

(DRYER HEATER)

It measures the temperature of

the Heater.

Содержание Advanced Jet AJ-1000

































































































































































































































































































Отзывы:

Нет отзывов