manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Заметки по обслуживанию, Страница: 275 / 288

Поделиться
Скачать
Roland Advanced Jet AJ-1000 Скачать руководство пользователя страница 275

7-23

Adjuster

Fix the bar for the crane.

bar

bar

After the transportation, perform the following operations.

1. Remove the packing materials from the machine.

2. Turn on the main power.

3. Fill the maintenance liquid to the maintenance liquid tray.

   1) Turn on the SUB POWER SW while pressing the Left, Right and Down keys to enter the SERVICE MODE.

   2) SERVICE MENU > SUB MENU > MAINTE.LIQUID > FILL M- ENTER KEY

   3) Maintenance Liquid will be filled in the tray automatically.
       *AJ will beep when it is finished.

4. Turn off the sub power.

5. Keep the main power on in order to keep the self cleaning function activated.

12

Before moving the machine, raise the Adjuster to the very top.

10

Do not use the Adjusters for the crane.

11

Содержание Advanced Jet AJ-1000

































































































































































































































































































Отзывы:

Нет отзывов