manualshive.com logo in svg

Roland Advanced Jet AJ-1000, Заметки по обслуживанию, Страница: 210 / 288

Поделиться
Скачать
Roland Advanced Jet AJ-1000 Скачать руководство пользователя страница 210

5-3

(Rear side of

the machine)

(Rear side of the

machine)

SLIDER SENSOR

It detects the back and force origin of the capping

unit.

MAINTENANCE LIQUID EMPTY

SENSOR

It detects whether the Maintenance Liquid is

empty or not.

MAINTENANCE LIQUID CARTRIDGE IC

It detects whether the Maintenance Liquid Cartridge is

installed or not and communicates the ink type and the

remaining amount of the ink.

INK CARTRIDGE IC

It detects whether the Ink Cartridge is

installed or not and communicates the ink

type and the remaining amount of the ink.

WIPER SENSOR

It detects the Wiper position.

MAINTENANCE LIQUID PUMP SENSOR

It detects the origin of the Maintenance Liquid Pump.

Содержание Advanced Jet AJ-1000

































































































































































































































































































Отзывы:

Нет отзывов