12/12/2005
sb_radio_draft_jmc
36
To disable the date/time display altogether when Soundbridge Radio is in standby, select
the corresponding option on this page.
When you are finished, simply close your web page.
For More Information
: For a complete list of Soundbridge Radio settings, see
“Settings.”
Turning Off Your SoundBridge Radio
When you are finished playing music on your Soundbridge Radio, press the
Standby
[
]
button on your remote. In
Standby
mode, your radio will display the date and time or a
blank display, depending on your preference. (See page --- for more information about
setting these preferences.)
If you were playing Internet radio from your “Favorite Radio Stations” library when you
pressed
Standby
[
] button, then pressing
Standby
again will resume playback of that
station. Otherwise it will return you to the music library that you were most recently
connected.
If you plan to disconnect the Soundbridge Radio from AC power, be sure to press the
Standby button first. This logs you out of the music server software running on your
computer.
Note
: Wait approximately ten seconds after pressing
Standby
[
] before unplugging
SoundBridge; this gives Soundbridge Radio time to flush its settings for a clean reboot.
Caution icon
: If you unp lug the Soundbridge Radio from AC power five times without
pressing the
Standby
[
] button on your remote first, iTunes may lock you out of
connecting to the server. This is because iTunes allows a maximum of five users to
connect at one time. If you do not first put Soundbridge Radio in standby mode, iTunes
thinks you are still connected. To restore your access to the iTunes server, close iTunes
and then restart it.
