12/12/2005
sb_radio_draft_jmc
19
You can also enter the name of a wireless network. To enter a network name, follow
these steps:
1.
From
Select WiFi SSID and Password
, select
Specify a wireless network
and
press Select [ ].
2.
Use the Right and Left [ ] buttons to find letters, number, spaces in the wireless
network name you are entering and then press Select [v] for each letter, number,
and space you choose.
3.
Use the Up and Down [ ] buttons for OK, space, delete, commas, periods, accent
letters, numbers, uppercase or lowercase letter.
For More Information
: For additional help connecting to your network, including
password help, see
Obtaining Your Wireless Access Point’s Password
.
Entering a Security Key
If you have a security key, you will need to enter your WEP [Wired Equivalent Privacy
(802.11 encryption protocol) ] key. This is the same key you have entered into your
Access Point and your computer.
To find more information about your Access Point, see “Obtaining Your Wireless Access
Point’s Password.”
Troubleshooting Wi-Fi Setup
If you have problems connecting the Soundbridge Radio to your music library, please
check the following:
•
Is Soundbridge Radio within range of your wireless network signal?
•
Performance varies depending on wireless network hardware, physical barriers
such as walls, and signal interference.
•
Is your computer on and is your wireless access point plugged in?
•
Is your music server software running on your computer? Is your music sharing
options enabled? See the “Enabling Music Sharing” section for more information.
•
If you have a password, did you enter your password correctly including case
sensitive characters?
For more information, visit our FAQ and User Forum at www.rokulabs.com/support
Personal Firewall (iTunes Users)
If you have trouble connecting and your computer has a firewall installed, make sure
your firewall is configured to allow iTunes music sharing by doing the following.
Mac
user
:
1.
Open
System Preferences
.
2.
Select
Sharing
and click the
Firewall
tab.
