12/12/2005
sb_radio_draft_jmc
35
Clock Settings
Need to complete
Needs work
This section describes radio settings that you change.
Radio Brightness, Contrast and Text Display
Not done
When in standby mode, Soundbridge Radio can display the date and time, similar to the
display below.
Insert visual
Use the Up and Down button on your remote control to change the time and date format
on your clock display.
Use the Right and Left buttons on your remote control to adjust the brightness of your
display. Pressing the Left button dims the clock display and pressing the Right button
brightens the clock display.
You can customize the clock display in a number of ways:
1.
When in Standby mode, use the Left/Right arrows to adjust the brightness of the
clock display. (This will not affect the brightness settings of the display when in
regular playback mode.)
2.
When in Standby mode, use the up/down arrows to cycle through modes of
display. For example, you can display large and small fonts, display the time but
not the date, etc. (Again, these settings will not be applied to your display when
you resume SoundBridge’s regular playback mode.)
3.
Use SoundBridge’s web page to configure the format of the date and time. You
can also turn off the clock display altogether. After your web page is launched,
click on the Configuration tab. Scroll down on the page until you see a display
that looks similar to the one below.
Reword to tell them to see the Roku Web Page section
You can customize how your time appears, and correct errors in the display of your date
and time. First, be sure that your time zone is selected correctly. Soundbridge Radio uses
an Internet connection to display the proper time for your time zone. If your Internet
connection is not availab le, Soundbridge Radio will be unable to display the date and
time in Standby mode.
Format your time display by choosing what to display in each of four fields. Soundbridge
Radio “strings together” all the fields to create the time display. For example, if you don’t
want to see seconds, or don’t want to see “AM/PM”, select the hour and minute format,
then choose the “Leave Blank” in the remaining drop down menus.
The date selection works the same way — you can choose the format that best fits your
geographic standard or your personal preference.
